• Pumps for transferring products from drums or open tanks
  1. - compression ratio 1:1
  2. - compression ratio 2:1
  3. - special tubes
  4. - flammable solvents see ATEX Directive
• Medium pressure Pumps for feeding coating machines, glueing machines, impregnation machines
  1. - economical for liquid products
  2. - economical for low viscosity
  3. - high delivery Medium viscosity
  4. - filtration
  5. - special tubes
  6. - flammable solvents see ATEX Directive
• High pressure Pumps for feeding coating machines, glueing machines, impregnation machines
  1. - delivery up to 600Kg/h even high viscosity
  2. - delivery up to 1100 kg/h high viscosity
  3. - delivery up to 1.300 kg/h medium viscosity
  4. - delivery up to 1.800 kg/h medium/high viscosity
  5. - filtration
  6. - special tubes
  7. - flammable solvents see ATEX Directive
• Full stainless steel Pumps for feeding coating machines, glueing machines, impregnation machines
  1. - delivery up to 600Kg/h even high viscosity
  2. - delivery up to 1100 kg/h high viscosity
  3. - delivery up to 1.300 kg/h medium viscosity
  4. - filtration
  5. - special tubes
  6. - flammable solvents see ATEX Directive
• Medium pressure Pumps for PVC plastisols
  1. - economical for low viscosity
  2. - high delivery Medium viscosity
  3. - filtration
  4. -special tubes
• High pressure Pumps for PVC plastisols
  1. - delivery up to 600Kg/h even high viscosity
  2. - delivery up to 1100 kg/h high viscosity/a>
  3. - delivery up to 1.300 kg/h medium viscosity
  4. - delivery up to 1.800 kg/h medium/high viscosity
  5. - filtration
  6. - special tubes
• Medium pressure Pumps for polyurethanes and others polymers in solution or in emulsion
  1. - economical for low viscosity
  2. - high delivery Medium viscosity
  3. - filtration
  4. - special tubes
  5. - flammable solvents see ATEX Directive
• High pressure Pumps for polyurethanes and others polymers in solution or in emulsion
  1. - delivery up to 600Kg/h even high viscosity
  2. - delivery up to 1100 kg/h high viscosity
  3. - delivery up to 1.300 kg/h medium viscosity
  4. - delivery up to 1.800 kg/h medium/high viscosity
  5. - filtration
  6. - special tubes
  7. - flammable solvents ATEX Directive
• Medium pressure Pumps for adhesive and bonding agents
  1. - economical for low viscosity
  2. - high delivery Medium viscosity
  3. - filtration
  4. - special tubes
  5. - flammable solvents see ATEX Directive
• Medium pressure Pumps for adhesive and bonding agents
  1. - delivery up to 600Kg/h even high viscosity
  2. - delivery up to 1100 kg/h high viscosity
  3. - delivery up to 1.300 kg/h medium viscosity
  4. - delivery up to 1.800 kg/h medium/high viscosity
  5. - filtration
  6. - special tubes
  7. - flammable solvents see ATEX Directive
• Pumps for lacquers and varnishes
  1. - compression ratio 1:1
  2. - compression ratio 2:1
  3. - special tubes
  4. - flammable solvents see ATEX Directive
• Pumps for inks and printing paints
  1. - compression ratio 1:1
  2. - compression ratio 2:1
  3. - special tubes
  4. - flammable solvents see ATEX Directive
• Pumps for roto screen and roto-flexo printing machines
  1. - compression ratio 1:1
  2. - compression ratio 2:1
  3. - special tubes
  4. - flammable solvents see ATEX Directive
• Pumps for fabrics printing machines
  1. - compression ratio 1:1
  2. - compression ratio 2:1
  3. - special tubes
• Pumps for rubber in solution
  1. - delivery up to 600Kg/h even high viscosity
  2. - delivery up to 1100 kg/h high viscosity
  3. - delivery up to 1.300 kg/h medium viscosity
  4. - delivery up to 1.800 kg/h medium/high viscosity
  5. - filtration
  6. - special tubes
  7. - flammable solvents see ATEX Directive
• Pumps for alkyl resins
  1. - economical for low viscosity
  2. - delivery up to 600Kg/h even high viscosity
  3. - high delivery Medium viscosity
  4. - special tubes
  5. - flammable solvents see ATEX Directive
• Pumps for phenolic resins
  1. - economical for low viscosity
  2. - delivery up to 600Kg/h even high viscosity
  3. - high delivery Medium viscosity
  4. - special tubes
  5. - flammable solvents see ATEX Directive
• Pumps for solvents, Lubricating oils and waxes in emulsion
  1. - compression ratio 1:1
  2. - compression ratio 2:1
  3. - special tubes
  4. - flammable solvents see ATEX Directive
• Pumps for dressings
  1. - economical for low viscosity
  2. - delivery up to 600Kg/h even high viscosity
  3. - high delivery Medium viscosity
  4. - special tubes for dressings even aggressive
• Pumps for detergents and liquid soaps
  1. - full stainless steel for medium viscosity
  2. - full stainless steel delivery up to 600Kg/h even high viscosity
  3. - full stainless steel delivery up to 1.300 kg/h medium/high viscosity
  4. - special tubes for detergents even aggressive
  5. - filtration
• Pumps for cosmetic industries
  1. - full stainless steel for medium viscosity
  2. - full stainless steel for medium viscosity
  3. - full stainless steel delivery up to 600Kg/h even high viscosity
  4. - full stainless steel high delivery Medium viscosity
  5. - Tubes for oils, creams and cosmetics
  6. - filtration
• Pumps for food industries
  1. - full stainless steel for medium viscosity
  2. - full stainless steel delivery up to 600Kg/h even high viscosity
  3. - full stainless steel delivery up to 1.300 kg/h medium/high viscosity
  4. - Tube for food products
  5. - filtration
• Tubes and filters for pumps
  1. - Special NBR tubes
  2. - Tubes for aggressive solvents
  3. - Filtering bags
  4. - "Disposable" filters
  5. - Filter fabrics
  6. - Steel filters

“DISPOSABLE” FILTERS

Monofilament PE or PA 66. Both are in high precision woven fabric. PA66 has optimum resistance to solvents. Contact us for advice on the most suitable types for your use.

.........

 

	Mn= mesh count nr. per cm Ms= mesh opening Ow= wire diameter A%= opening area %

STEEL “DOUBLE BODY” FILTERS

We have double-body steel filters for continuous filtration of even very viscosous products.
One filter can be used while the other is being cleaned.
The inside filtering meshes can be in special steel or stainless steel monofilament with different meshes and calibrated holes.
We can propose versions in galvanised steel or 303 – 304 – 316 stainless steel, or even other steels on request.
Contact us for quotes and advice on the most suitable type for your needs.

The illustrations and data are provided by way of example and are not binding.